USB Charger (USB Power Delivery)

USB has evolved from a data interface capable of supplying limited power to a primary provider of power with a data interface. Today many devices charge or get their power from USB ports contained in laptops, workstations, docking stations, displays, cars, airplanes or even wall sockets. USB has become a ubiquitous power socket for many small devices such as cell phones, tablets, portable speakers and other hand-held devices. Users need USB to fulfil their requirements not only in terms of data but also to provide power to, or charge, their devices simply, often without the need to load a driver, in order to carry out “traditional” USB functions.

The USB Power Delivery (USB PD) Specification enables the maximum functionality of USB by providing more flexible power delivery along with data over a single cable. Its aim is to operate with and build on the existing USB ecosystem.

Announced in 2021, the USB PD Revision 3.1 specification is a major update to enable delivering up to 240W of power over full featured USB Type-C® cable and connector. Prior to this update, USB PD was limited to 100W using a solution based on 20V using USB Type-C cables rated at 5A. The USB Type-C specification has also been updated to Release 2.1 to define 240W cable requirements, and with the updated USB PD protocol and power supply definition, this extends the applicability of USB power delivery to a large number of applications where 100W wasn't adequate.

Examples:

Enables higher power over a full featured USB Type-C® cable and connector to applications up to 240W, including larger Notebook PCs, Gaming PCs, Desktops, Workstations, Docking Stations and Displays.

Enables new higher power use cases such as USB bus powered Hard Disk Drives (HDDs) and printers. This eliminates the need for a separate power brick.

A monitor with a supply from the wall can power, or charge, a laptop while still displaying.

USB power bricks or chargers are able to supply power through a laptop’s USB ports.

Laptops and USB power bricks can provide higher power to battery powered devices (not currently defined by USB).

Battery powered devices can get increased charging current from a hub and then give it back temporarily when the user’s HDD requires to spin up.

Power Delivery is designed to co-exist with standard USB Battery Charging implementations. Implementers should note that if they include battery charging capability in their devices or support for host adapters such as docks or ACAs they should also reference the Battery Charging Specification.

Information about Power Delivery Compliance testing is available here.

In addition to passing USB-IF compliance testing and inclusion of its Power Delivery products on the Integrators List, companies wishing to use the certified USB logos must have a current on file USB-IF Trademark License Agreement. USB Power Delivery is covered by the relevant adopters agreements for either USB 2.0, USB 3.0, or USB4™ depending on the specification implemented. Recommendations for which adopters agreements are appropriate to execute are listed below:

USB 2.0 products: USB 2.0 Adopters Agreement plus the “USB Power Delivery Specification” Adopters Agreement

USB 3.2 products: USB 3.0 Adopters Agreement, USB 2.0 Adopters Agreement plus the “USB Power Delivery Specification” Adopters Agreement

USB4 products: USB4 Adopters Agreement